1 / 2
IKEA Ivar Spool Holder — zdjęcie 1
1 / 2

IKEA Ivar Spool Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cheap Spool Holder Solution for your Ikea Ivar shelves

Ocena
0 / 5
Polubienia
39
Pobrania
153
Wydruki
0
Wyświetlenia
1491
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Snaps directly onto the shelf pins. Holds two 20mm beams. I used pine, but recommend something stiffer if you go for the wider shelf. The pine holds up for quite a while now but I've switched to 20x2mm steel nonetheless

There are only variants for the 30cm version. 

I'm attaching the CAD file so you can edit it, if you need a different diameter or the 50cm version of the shelves

Update

I've added a pin that you can print and use to mount the beams on the shelf if you got no original pins left. Printed them in PLA and they hold the weight just fine 👌

 

Print Settings


4 perimeters
40% infill (grid)
5 bottom / 5 top layers
no supports
brim for the pins

Tagi