Butterfly HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.29 – €5.24 net (excluding VAT)
For file: Blue-Butteryfly-HueForge_0.08mm_PLA_MINI_6h26m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.77 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 6.43 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
HueForge Butteryfly created for the Polymaker Blue Start Pack of Filaments. Only manual filament swaps required.
- Rating
- 4.941 / 5
- Likes
- 261
- Downloads
- 1,285
- Makes
- 19
- Views
- 7,639
- Reviews
- 17
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HueForge Butterfly I created for the Polymaker Blue Start Pack of Filaments. Only manual filament swaps required.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments used Polymaker Blue Starter Pack:
Swap Instructions:
Start with Panchroma Matte Charcoal Black
At layer #9 (0.8mm) swap to PolyLite Azure Blue
At layer #19 (1.6mm) swap to PolyLite Aqua Blue
At layer #30 (2.48mm) swap to PolyLite White for the rest.