Parrot HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge Parrot created for the Polymaker HueForge Red Starter Pack. Only manual filament swaps required.
- Rating
- 4.833 / 5
- Likes
- 117
- Downloads
- 472
- Makes
- 7
- Views
- 4,406
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HueForge Parrot created for the Polymaker HueForge Red Starter Pack. Only manual filament swaps required.
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm
Filaments used Polymaker Red Starter Pack:
Panchroma Matte PLA Charcoal Black Transmission Distance: 0.3
Polymaker PolyLite PLA Pro Light Red Transmission Distance: 1
Swap Instructions:
Start with Matte Charcoal Black
At layer #5 (0.72mm) swap to PolyLite Red
At layer #9 (1.2mm) swap to PolyLite Light Red
At layer #11 (1.44m) swap to PolyLite White for the rest.