1 / 2
Iguana HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HueForge Iguana created for the Polymaker Green Start Pack of Filaments. Only manual filament swaps required.
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm
Filaments used Polymaker Green Starter Pack:
Panchroma Matte Charcoal PLA Black Transmission Distance: 0.3
Polymaker PolyLite Lime PLA Green Transmission Distance: 3.5
Swap Instructions:
Start with Matte Charcoal Black
At layer #6 (0.84mm) swap to PolyLite Green
At layer #9 (1.2mm) swap to PolyLite Lime Green
At layer #12 (1.56mm) swap to PolyLite White for the rest.