Fire Dragon HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge Fire Dragon created for the Polymaker Fire Color Set. Only manual filament swaps required.
- Rating
- 5 / 5
- Likes
- 353
- Downloads
- 1,176
- Makes
- 15
- Views
- 8,980
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
HueForge Fire Dragon created for the Polymaker Fire Color Set. Only manual filament swaps required.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments used Polymaker Fire Color Set:
Panchroma Matte PLA Charcoal Black Transmission Distance: 0.3
Polymaker PolyLite PLA Lemon Yellow Transmission Distance: 6.5
Swap Instructions:
Start with Matte Charcoal Black
At layer #9 (0.8mm) swap to PolyLite Red
At layer #12 (1.04mm) swap to PolyLite Orange
At layer #21 (1.76mm) swap to PolyLite Lemon Yellow
At layer #31 (2.56mm) swap PolyLite White for the rest.