1 / 4
Mount for Knomi display in front skirt for Voron V2.4 350 and 300.
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Useful if you use Afterburner or you don't want the Knomi inside the chamber.
- Rating
- 5 / 5
- Likes
- 82
- Downloads
- 269
- Makes
- 2
- Views
- 2,499
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Models for 350 and 300mm version with original btt mini 12864 display.
Print with standart Voron print setings from ABS.
- Layer height: 0.2mm.
- Extrusion width: 0.4mm, forced.
- Infill pecentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic.
- Wall count: 4.
- Solid top/bottom layers: 5.
Only difference is that you need to use support for the Knomi “hole”.
Do not overtight the m3x10 screw in the bracket. Be gently, it screw directly into the plastic.