1 / 4
Mount for Knomi display in front skirt for Voron V2.4 350 and 300.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful if you use Afterburner or you don't want the Knomi inside the chamber.
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 270
- Wydruki
- 2
- Wyświetlenia
- 2501
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 4)Remiksy (0)Kolekcje (129)Powiązane
Models for 350 and 300mm version with original btt mini 12864 display.
Print with standart Voron print setings from ABS.
- Layer height: 0.2mm.
- Extrusion width: 0.4mm, forced.
- Infill pecentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic.
- Wall count: 4.
- Solid top/bottom layers: 5.
Only difference is that you need to use support for the Knomi “hole”.
Do not overtight the m3x10 screw in the bracket. Be gently, it screw directly into the plastic.