Tamiya Blitzer Wheels 2.2 and 2.2/3.0 SCT 2WD
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two sets of wheels for the Tamiya Blitzer Beetle, but should also fit Stadium Blitzer and Stadium Thunder and mostly…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 156
- Makes
- 0
- Views
- 2,020
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Two sets of wheels for the Tamiya Blitzer Beetle, but should also fit Stadium Blitzer and Stadium Thunder and mostly likely other 2WD Tamiya models which have ball-bearing front wheels rather than the 12mm hex found on most aftermarket wheels.
The 2.2 wheels are basically stock replacements.
The SCT wheels I designed because I couldn't find replacement rear tires to fit the stock wheels. They are 2.2"/3.0" diameter and 42mm wide with 12mm hex drive in the rear and freewheel on 5x11x4 bearings in the front.
Print face up at 100% infill with support under only the hub area only.
Print instructions
Category: R/C Vehicles Summary
Two sets of wheels for the Tamiya Blitzer Beetle, but should also fit Stadium Blitzer and Stadium Thunder and mostly likely other 2WD Tamiya models which have ball-bearing front wheels rather than the 12mm hex found on most aftermarket wheels.
The 2.2 wheels are basically stock replacements.
The SCT wheels I designed because I couldn't find replacement rear tires to fit the stock wheels. They are 2.2"/3.0" diameter and 42mm wide with 12mm hex drive in the rear and freewheel on 5x11x4 bearings in the front.
Print face up at 100% infill with support under only the hub area only.
Print Settings
Supports:
Yes
Infill:
100
</div>Notes:
Support needed under hub area only.