1 / 2
PTFE tube fitting holder for RepRack Rollers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds your PC4-M10 fitting!
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 116
- Makes
- 1
- Views
- 649
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
BOM
- 4x #6 x 5/8" (16mm) thread forming screw, as used in the RepRack system
- You need 4 screws to attach the ECAS holder as well as the rear spacer. You only need 2 if you're omitting the rear spacer
- 1x PTFE ECAS fitting
Assembly
Simply press ECAS in and screw it into place on the bottom of your RackRoller! Optionally (but recommended) you can attach the rear spacer to keep the rollers separated.
There is a half-width version included that only connects on one side if you already have roller spacers. The full-width version is recommended since it makes feeding/retracting filament by hand much easier, but you do you.
--------
V1 BOM
- 2x #6 x 5/8" (16mm) thread forming screw, as used in the RepRack system
- 1x PC4-M10