HueForge Deadpool arms crossed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge filament painting of Deadpool with his arms crossed
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 55
- Makes
- 0
- Views
- 519
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Polylite Black Transmission Distance: 0.3
PLA PolyLite Wine Red Transmission Distance: 1
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Polylite White Transmission Distance: 6
Swap Instructions:
Black until layer #5 at 0.48mm
Wine Red until layer #10 at 0.88mm
Black until layer #11 at 0.96mm
Yellow until layer #17 at 1.44mm
Steel Grey until layer #22 at 1.84mm
White for the rest.