Pi 4 Minimal Skeleton Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There were no small, or skeleton cases on Thingiverse for the Pi 4.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 42
- Makes
- 0
- Views
- 546
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
There were no small, or skeleton cases on Thingiverse for the Pi 4. I grabbed a set of calipers, and designed this case for it. It is specifically designed to hug the dimensions of the case very board tightly, and only requires four M2 x 10mm bolts to put together.
This case has an optional hole ( and a filler ) for a 30x30x10 mm 5V fan. Since it's designed to VERY tight tolerances, slight differences in pick-and-place positioning may have an effect on how this fits your Pi4.
I am willing to make edits/changes on request, just ask in the comments.
This thing was made with Tinkercad. You can modify and make edits on a copy at:
https://www.tinkercad.com/things/chMv7vzZkCD
Also, if you make this case, please post your prints! I'd love to see how they came out.
Print instructions
Unassociated tags: pi 4, pi case, raspberry pi
Category: 3D Printing Summary
There were no small, or skeleton cases on Thingiverse for the Pi 4. I grabbed a set of calipers, and designed this case for it. It is specifically designed to hug the dimensions of the case very board tightly, and only requires four M2 x 10mm bolts to put together.
This case has an optional hole ( and a filler ) for a 30x30x10 mm 5V fan. Since it's designed to VERY tight tolerances, slight differences in pick-and-place positioning may have an effect on how this fits your Pi4.
I am willing to make edits/changes on request, just ask in the comments.
This thing was made with Tinkercad. You can modify and make edits on a copy at:
https://www.tinkercad.com/things/chMv7vzZkCD
Also, if you make this case, please post your prints! I'd love to see how they came out.
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
</div>Supports:Yes
Resolution:
200 micron
</div>Infill:20
Filament: eSun PLA Green
Notes:
Best printed at 0.15 - 0.25 layer sizes, infill 20%, 2 perimeters.
Use base supports only, the fan holder is tricky to bridge.