Sapphire Dragon HueForge Filament Painting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sapphire Dragon HueForge model, remixed from the Emerald Dragon remix. DO NOT RESCALE IN Z
- Rating
- 5 / 5
- Likes
- 162
- Downloads
- 251
- Makes
- 1
- Views
- 1,771
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
8 Color HueForge model of a “Sapphire” Dragon. Remixed from the remix of the Emerald Dragon. I resized to 200x200 and then re-colored.
DO NOT RESCALE IN Z
Print at 100% infill with a layer height of 0.07mm with a base layer of 0.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Dark Blue Transmission Distance: 0.5
PLA PolyLite Azure Blue Transmission Distance: 3
PLA PolyLite Aqua Blue Transmission Distance: 2.5
PLA PolyTerra Cotton White Transmission Distance: 2.5
PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
PLA Overture Silk Gold Transmission Distance: 4
PLA PolyTerra Cotton White Transmission Distance: 2.5
Swap Instructions:
Black until layer #9 at 0.76mm
Dark Blue until layer #13 at 1.04mm
Azure Blue until layer #22 at 1.67mm
Aqua Blue until layer #26 at 1.95mm
Cotton White until layer #34 at 2.51mm
Savannah Yellow until layer #36 at 2.65mm
Gold until layer #42 at 3.07mm
Cotton White for the rest.
Use the exact layer heights in your slicer to get the correct result