1 / 3
Poster Banner - Cutomisable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large poster banner connected by dovetail joints
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 1
- Views
- 224
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this for a 1360mm wide world map. I used 4 pieces:
- 1x end_a
- 2x middle
- 1x end_b
Clipped with a few 25mm binder clips, super glue is not needed.
Customisable: You can trim, scale and rejoin for any size you need. e.g. with only one middle piece makes a 1020mm, or you can cut the joint off and scale the rest part at single direction to make a new length and then merge the joint back.
Print: Supports required for dovetail joints. PETG or ABS is recommended, PLA would be fine, but please be gentle when you join them together.