Ikea MELLTORP cross brace bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cross brace bracket for Ikea Melltorp table
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 21
- Makes
- 0
- Views
- 434
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Large printers and this table does not really work together because of the wobble.
So i designed a two piece bracket that can be screwed to the legs of the table and really stiffen this table up with the help of an M10 threaded rod.
What you will need for this project is:
1x 1 meter M10 threaded rod (needs to be cut to length so a hack saw/angle grinder is needed)
4x M10 nuts
8x 5mm x 40 mm screws either wood screws or self tappers
I've printed the threaded rod side of the bracket with 60% infill and 100% infill with the other part of the bracket.
This makes a huge difference in stiffness of this table - No more wobble