1 / 8
Parametric Spinning Top
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric Spinning Top Try out big and small tops with thick or thin rings to find out which one spins best!
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 124
- Makes
- 2
- Views
- 606
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parametric Spinning Top
Try out big and small tops with thick or thin rings to find out which one spins best!
Assembly:
- Print both halves ... tip: print sequentially to avoid stringing
- Glue together
As a centering help, you can use a short piece of 1.75 mm filament in the centering holes in the "bottom" faces (as on the printbed).
If you're looking for a good top that can be assembled without glueing, check out this design by schutzi99:
https://www.thingiverse.com/thing:3490151
I found it spins quite well, but I thought larger or heavier tops might spin even better ... :-)