Wall mounter paper roll holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A paper roll holder that you are able to mount any way you like it.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 37
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
In the laundry room we needed a paper roll holder. The current one we had was kind of a bad shape and badly missplaced.
The design is fairly simple. One base mounting plate, two threaded rods and an end screw. Assemble them that suits you the best.
Wall mount + threaded rod + screw = Toilet paper roll holder.
Wall mount + threaded rod x2 + screw = Kitchen paper roll holder.
As you can seen in the pictures, you're able to mount it in any way you like. I prefere to mount it with the holder surrounding the paper roll, but for your needs there are posibilties to mount it sideways. The printed screw is to keep the roll in place.
For mounting, Pan head of free choise(Torx, hexagonal socket or phillips) with a diameter of Ø4.2 is recomended. Use the proper length.
The design does not need any support during printing.
I've printed mine with following setting:
- Nozzle: 0.4
- Filament: PLA
- Layer thickness: 0.20 mm
- Support: none