Ardupilot Tricopter Frame - Autonomous FPV Test Platform
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my design of a tricopter frame for experimenting with Ardupilot.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 367
- Makes
- 0
- Views
- 2,620
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Hi everyone!
This is my 3D printed Tricopter test platform for Ardupilot FPV setup.
More about this project in my video:
Parts used in this project:
1x Mateksys F405-SE Flight Controller
3x Emax RS2205 2300KV Brushless Motor
3x LittleBee-Spring 30A ESC
3x 5045 propellers
1x MG-90S Servo
1x 5V BEC for Servo
1x BN-880 or Holybro M8 5883 GPS and Compass module
1x ExpressLRS EP1 RX
1x 3S 3000mah Li-ion battery pack
2x 10x5x4mm Bearing
1x 5x32mm Carbon/Aluminium tube (Servo tilt mechanism)
1x 5x100mm Carbon/Aluminium tube (GPS mast)
3x ZMR250 Carbon Arm
M3 imbus screws
