1 / 2
Easy to Print/Use Paper Towel Holder (Remix) (w/ & without locking mechanism) — image 1
1 / 2

Easy to Print/Use Paper Towel Holder (Remix) (w/ & without locking mechanism)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed, improved version of the easy to print paper towel holder by @BlueBaron37 Also, now with locking mechanism!

Rating
5 / 5
Likes
13
Downloads
60
Makes
2
Views
902
Reviews
1

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution

Remixed version of the “Easy to Print/Use Paper Towel Holder” V2 model, focused on better, softer looks and easier usage. The original model works quite fine, but is a bit “rough” to my taste, and the tolerances were not achieveable on my printer, so I recreated the model (while learning OnShape) and made some adjustments.

Also, now with locking mechanism!

Update (2023-07-24):

  • Added "variant with stoppers" - a simple locking mechanism which prevents accidentally sliding out of the arm from the rail.

Main changes (vs original model):

  • V1, with stoppers variant
    • Added stoppers (locking mechanism) on the connector & rail system
      • Two small protrusions on the arm's connector
      • Two small grooves in the rail's dovetail
      • Small gutter which directs the protrusions when sliding in
  • V1, both variants:
    • Introduced filets for better smoothness where it matters (mostly on the arm)
    • Slight dimensional changes
      • Slightly thicker arm (8mm)
      • Slightly shorter towel tube (45mm)
      • Longer rail (40mm)
    • Added adhesive groove on the top part of the rail
      • 0.3mm extrusion for your VHB / PowerTape strip
    • Improved arcs smoothness
      • Original model had low arc resolutions on the tube, leading to choppy towel holder
    • Dovertail-shaped rail-to-arm connector
    • Introduced less strict tolerances for rail-to-arm connector
      • 0.3mm tolerance
      • Please note that for well tuned and accurate printers this might degrade how well the arm sits in place
        • I'm also testing a version with small protrusions which should lock the arm in place, while keeping tolerances relaxed for ease of printing, stay tuned
    • Face blend between arm's connector and arm's main surface
      • Slightly improved bendiness of the arm

Print parameters:

  • Material: PETG (PLA should be fine as well)
  • Layer height: 0.2mm
  • Perimeters: 2 (or more to improve bendiness even further)
  • Infill: 15% gyroid

Changelog:

  • 2023-07-23
    • V1 (basic) released
  • 2023-07-24
    • V1 (with stoppers) added

Tags