Little Piggy Pigtail Bands
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This little piggy is so cute
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 53
- Makes
- 0
- Views
- 428
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Women
- License
- Creative Commons — Public Domain
Introducing the “This Little Piggy” pigtail bands. For that special little piggy in your life.
Some printing tips:
There are two different versions. “Piggy.stl” is for those who have an MMU or AMS and want to print it flat. "Piggy_raised.stl" is for those who want to do color changes by layer:
- Print with pink first from 0-1 mm
- The white areas of the eyes are from 1 to 1.2mm
- The color areas of the eyes are from 1.2mm to 1.3 mm
- All black outlining is from 1.3 mm to 1.5 mm
For the flat model: A smaller nozzle diameter is desirable. However, I did the ones in my photographs with a .4 mm nozzle. I used .08 mm layers and had ironing turned on 1% for all layers. I also used a .36 line width for all lines. It was printed face down on a textured plate with the bottom surface pattern set to “monotonic”.
The ring for the band is printed separate and glued on. Alternatively, you can attach it to the pig in the slicer and print it in one go. Set a pause at a certain layer, place the band in the ring (make sure it won't interfere with the nozzle", and resume the print.