1 / 6
LRS-150 Mounting braket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting braket for a LRS-150-xx Meanwell powersupply onto 3030 Profiles
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 77
- Makes
- 1
- Views
- 467
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
Designed it it mount a Meanwell LRS-150 power supply into the edge of 2 3030 Profiles.
Good thing is that all Meanwell LRS-150 PSU have the same size and mounting holes, because I took the measurments at the wrong one and it still worked for the other one. (Bad thing is I just recognized it after switching on the extruder and therefore fried my Mainboard. 48V insted of 24V…)
PSU is mounted stiff and nice. I use this on my Filament extruder (designed by Artme3d)
Printsettings :
- 4 top and bottom layers
- 3-4 Wall Layers
- Use PLA or ABS. PETG was too flexible.