1 / 3
Terrarium corner protector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple aquarium/terrarium corner protector/cover for 4mm thick glass.
- Rating
- 0 / 5
- Likes
- 62
- Downloads
- 155
- Makes
- 0
- Views
- 874
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
The glass at the corners of my terrarium broke off, leaving a dangerously sharp edge exposed. I decided to design a simple cover in order to protect my fingers.
They have 45° chamfers at the bottom, so you should be sure you can print that steep. I initially planned to print the inside with TPU and the outside with PLA, but the AMS does not (reliably) support TPU, so i just used PLA.
The thickness of my glass is 4mm, but you can scale your cover according to the thickness of yours.