1 / 5
Join the Resistance Emblem
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Join the Resistance Emblem
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 67
- Makes
- 1
- Views
- 250
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Join the Resistance Emblem
Print Settings:
- 0.4mm nozzle
- 0.2mm layer height
- Default prusa slicer settings
- No supports
- Make sure bridging is running perpendicular to the cutouts (shorter bridging)
- Do not change the scale or else the cutouts on the back will not fit double-sided tape or stick on magnets
This emblem has multiple heights - intended for multiple manual color changes. Use the slicer to insert color changes at the different levels.
There are two cutouts on the back for ½" double-sided tape (or ½" stick on magnets).