2,625 models
HUGE UPDATE 9/13/2024: Dummy 13 v1.0 is now available! Check out the new and improved version of Dummy 13 here. This page will keep the previous beta files to ensure that no one's remixes are broken. Dummy 13 uses a CC BY 4.0 license!…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
Lucky 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Print approx. €7.79–€9.52 excl. taxPreliminary estimate for PETGSource material: PET
Mini 13 is now on a CC BY 4.0 license! This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
About this model Say hello to Carbon 13, the latest generation of 3D printable action figures. Carbon 13 introduces a hybrid joint system that preserves the dynamic range of articulation you expect from the 13 series while freeing up…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for PETGSource material: PET
The orange Gyro 7 in the pictures is printed in 0.20mm layer height Printing Material: PETG (PLA makes the joints too loose when using the normal skeleton and too tight for the tight Skeleton . Assembly is also more difficult in PLA.)…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for PETGSource material: PET
joint case with cap instolled print in place. cap fixed to main body in 1 file with no supports. Satisfying feeling with opening and closing the cap. recomend printing with brim, after cap is finished is possible to crank up the speed as…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Acquired a benchtop jointer second hand, but it was missing the dust port adapter. This works with the Delta 6" Variable Speed Bench Jointer as shown, and possibly works with the following as they all look like they are made in the same…
Print approx. €4.37–€5.34 excl. taxPreliminary estimate for PETGSource material: PET
Makerpipe ( https://makerpipe.com/ ) is this fun Kickstarter that makes connectors that allow you to use inexpensive EMT (Electrical Conduit) for creating things. It's kinda like having an Erector Set for adults. I hope they plan to…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! Descpription: I designed several joints for connecting square tubes and shelves, or to connect with Kallax shelves from Ikea.…
Print approx. €5.65–€6.91 excl. taxPreliminary estimate for PETGSource material: PET
Jabra Evolve 65 joint fix keeping earpiece still turning. Printed from PETG, nozzle 0.4mm, layer 0.1mm, 100% infill, support on printer pad Sometimes it could be useful to glue A and B parts together by superglue.
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Use case: Once I had completed the slim 12mm lockable ball joint, I realized how super useful this kind of design is. While the lock is quite strong on the 12mm ball already, I figured there are probably use cases that require an even…
Update - Slim variant added to models Model and Scaling I made this ball joint for one of my designs and decided to make a bare version of it that you can extend and adapt to your liking. You can also just take a look at the design and…
This is essentially a re-make of https://www.printables.com/model/666609-ender-3-v3-se-ball-joint-filament-guide with a more reliable mounting option. As mentioned there, I really like the ball joint filament guide, it's fun and…
Drop-in replacement of original hip joint. I acquire this idea from Bandai HG Gunpla models, allow the two ball joints to move upward and downward independently. Significantly improve the mobility of legs. About the “improved” folder:…
This is a geometrically CORRECT Hirth joint. It includes SOURCE files and DOCUMENTATION. There are a lot of Hirth joints out there. Some are completely wrong, some are very close, but almost none of them are geometrically correct. If you…
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
E_Tech 14 made an awesome jont fix. I took his design and made it even better.. now it can be printed much easier. The design is also optimized. update: both sides Remix of: https://www.thingiverse.com/thing:4724194
Set of tools for your MINI 13 , LUCKY 13 , EASY 13 and DUMMY 13 Printable Jointed Figures. This set includes the typical sword, pickaxe, axe and shovel - exactly as you know it from Minecraft :) Printing Without any support 0.15 layer…
This is a 1/3 scale ball jointed doll I designed mostly as a way for me to get acquainted with Blender. This model is my third blender sculpt and my first bjd, plus I've never actually seen a ball jointed doll in real life sooo.. have low…
0.75in. 19mm. Pipe Joiner PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
I designed these fasteners to help me connect my spare cardboard boxes and pieces together to make structures for both my kids and our bunnies! Each bracket features non-destructive teeth that help to grid the cardboard for extra grip.…
This model is compatible with the lego system.
I put four of IKEA's “Billy” bookshelves in a room and found them to stand slightly unevenly, probably due to the uneven floor. Like every problem I encounter nowadays, there was a way to 3D print a solution! This little bracket did the…
This is my 3rd and favorite phone stand. Very stable with all sizes even with a standard iPad down to an iPhone 5S size. The stand is collapsable and will easily pack away if you are on the move. The joint is nice and snug with a very…
This model is compatible with the lego system.
Brackets for joining computer fans together. Supported fan sizes: 220mm 200mm 140mm 120mm 92mm 80mm 70mm 60mm 50mm 40mm
Unprofessionally “Fused” the Joiner and Anchor, added some internal fill to make it more solid because it kept breaking. I personally printed it at 75% because I did not want it to break again. You can try it out with whatever infill you…
Join two ends of 20mm corrugated plastic conduit together
Link to Mark 2 version. 2016 Ford Ranger ball joint phone mount (Mark 2) by Alexander Brown | Download free STL model | Printables.com This phone mount, mounts to the 2016 Ford Rangers dash without the need for glue, screws or to…
BOM: Printed with ROSA3D Starter PLA Red Complete your 3D-printed woodworking and cabinet assembly toolkit! Alongside our L-corner and T-joint jigs, this straight alignment jig is the perfect tool for connecting two standard 18mm boards…
Application This GoPro (action camera) mount is made to fit to my generic lockable ball joint eco system, which can be found here: https://www.printables.com/model/370429-generic-lockable-ball-joint As the inner thread inside the GoPro…
2nd attempt at a doll, will update as i modify it. head will be reworked in the future; all limbs have the left side, duplicate and flip for the right side; made hands and feet so that they can be attached with s hooks; head has slots for…
PLA or PLA+ will work just fine. You can print it with PETG if you like it sturdier. 92 mm inner diameter. 60 - 70 mm depth.
Recommended settings: (100% scale and 0.4 nozzle) Material Parts PETG, ABS, ASA Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot…
This is the ender 3 (not pro, v2, neo, se, v3, etc.) based on its GitHub page. I jointed the f3d file with rigid groups and as-built joints allowing for motion of the X, Y, and Z axes as well as other degrees of freedom (e.g. the…
This is still in beta face files, and other things might change. Infill 25% supports required tree supports recommended Print in PETG tessreact https://www.printables.com/model/716741-tessreact-for-thanos-jointed-figure/files
The model is a hollow cylinder with an opening going around half of the circumference. I nested a smaller cylinder inside it and attached an arm coming off of it.
I blended the widened hip, knee, and ankle joints of the Maker Faire Robot remix from tuxcat to include the weapons from steveweber314's remix: http://www.thingiverse.com/thing:841695 http://www.thingiverse.com/thing:454960 If you've got…
This model is compatible with the lego system.
https://vespa-riviera.ch/ Clip Joint porte Peugeot 207 Printed Prusa MK3S MMU2 0.15 mm remplissage 100% Print instructions Category: Automotive Summary https://vespa-riviera.ch/ Clip Joint porte Peugeot 207 Printed Prusa MK3S MMU2 0.15 mm…
Added an 2nd advanced form with more design, and Rocket Launchers. Assembly instructions: 1: Attach the dark brown parts to either side of the light brown parts 2: attach the remaining side of the light brown parts to the corners of the…
Join two ends of 16mm corrugated plastic conduit together
This is the first model of our Modular Dogs Series - a collection of jointed dog figures designed for mix-and-match fun. Choose a body, a head, and arms to assemble your personalized pup. Please note this model require supports. Print,…
Reworked the original joint to account for materials that shrink when cool, such as ABS/ASA.
Each branch of the reef structure can be created from PVC pipe and these joint elements. The lengths of pipe needed for a single reef component are: 23 7/8 inch (bottom) 9 inch (lower branch, level 2) 9 inch (upper branch, level 3) 12 ¾…
Cancer of the elbow joint, holes in the bone are the result of progressive degeneration of bone tissue resulting in a lack of X-ray absorption. The model was used to assess the pathology and plan treatment without performing a resection…
Sometimes you want to join two 2020 extrusions together but in a way that can be removed without any tools. It is sometimes possible to use the Annex “corner” clips for this, but sometimes this is not possible. My use-case, for example,…
Ball jointed dolls (BJD) often come with a removable, magentic 'head cap' on the back of the head. This allows for customizable eyes, and removal of the head for easy dressing of the doll or painting of the face. However, it's often the…
Lock your sofa sections together with no tools, no damage, and no slipping apart. This connector holds the couch sections together using the existing screw on the feet to secure it in place. You don't need to screw anything into the…
This is a CV Joint Boot for the front left CV Joint on a Land Rover Range Rover - original part number LR032576 ... works exact the same as the original but for fraction of the costs if made on your 3D printer using TPU
Introducing the Jointed BD-1, a remarkable addition to your figure collection. This joined figure is crafted with exceptional attention to detail and is sure to impress. Its design is perfect for makers who are looking for something…
Model is intended to be printed without supports. Sizing in the saved files is for the cheap (but in my experience quite effective) quick clamps available from time to time in Aldi Australia (I don't know if they are also in other…
Actuated joint for camera arm https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m using a Bipolar Stepper motor and cycloidal gear from https://www.thingiverse.com/thing:2669441
Joint spatula set for silicone and acrylic. Set of square and round pullers. Works great with TPU.
A challenge for your printer!! "Braq" is a jointed dragon of 42 pieces. Once printed pieces only need an elastic cord 2 to 3mm thick to join them. Check the assembly instructions on this video https://youtu.be/pEerHkxMN2w Author:…
A barnum join. Large diameter : 24,5mm Small diameter : 18,8mm Printed in PETG for use outdoor. Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: Yes
If you have to remove big vertical separators in drawer for space but want to keep horizontal for organization.
Ball joint test print with 5mm female joint an 4.7mm~5.2mm male joint.
The modified SV08 XY gantry joints correct the misaligned A and B belts, reducing artifacts like ringing, ghosting and uneven walls. Unlike most of the other belt correction designs, this is a one piece design to try and help increase…
AQR0N: A highly adaptable multi-purpose machine designed to carry out any given task and let nothing stand in its way. Assembly instructions are included in the pictures if needed. I recommend printing the Main body in PLA and the Joints…
Woodworking Joint Bridge - mixed to print flat for additional strength. I printed in black PETG. Strength: 4 wall lopes and 40% sparse infill density.
Revision 2 After working on print-in-place flexible fabric, I have updated my templates to include expanding joints in addition to alternate orientations. Style A uses a female socket in the middle, and Style B uses a male connector in…
Studio lighting typically utilizes a Rosette or Hirth joint mechanism to enable tilting and secure the angle in place. On the Godox SL150, this mechanism relies on two plastic pins that bear the majority of the light's weight when angled.…
I had purchased the EVEO Cable Hider channels from Amazon. However the small set does not include a T-Junction cover. Now you can print your own, along with some other caps/covers. This works with the above linked channels, not sure if…
Made these small castle joint blocks to help visualize and design a box with walls. I want to build a box edges with bars and join them with castle joints, but I want to make the walls out of plywood by cutting grooves into the bars to…
Tee piece for heater hose 3 cyl 1.0lt Daihatsu Sirion/Toyota Duet
A finger-jointed box with octagon windows.
Infill 20% get the full thanos here https://www.printables.com/model/716580-thanos-jointed-figure-beta
A replacement for your Spear and Jackson Leaf Grabber. The Joint that connects the handle to the grabber breaks over time. Depending on your print you may need to bang it in.
Fix your bed in minutes and sleep without worries! Is your bed frame falling apart? Are the slats sliding around or making annoying noises every time you move? This heavy-duty connector is designed to lock two boards (slats) together,…
Modio designed version of armored Samus remix.
This is a printable replacement for the joint on which the gearbox pivots on the Tamiya DT-01. I created the files to resolve missing joint components on DT-01 that I own. It fits exactly as the original does; joint sliding into the…
The joiner is simply twisted into place on both panels, or rotated into one panel (with the thicker side of the joiner) and clipped into place on the narrower side. Tip: it is easiest to clip panels on diagonally, one corner then the…
I recommend at least 15% infill with snug supports NOT TREE SUPPORTS also with petg
Guess what? A new figure already? Yep! This is just the same figure as V5 but designed with decoration in mind. Its feet are functional, and the biggest change is the decoration. Print this in PETG, because PETG does not wear down quickly…
Joining two NUC5i5MYHE computers together to mount on a Geeekpi .5U vented shelf for a mini rack. The size of two computers side by side extend past the shelf slightly so I wanted this to keep them together. Panel is 2.8mm thick to stay…
Couldn’t find an adequate x endstop so I made one for the Voron using a carbon XY gantry joints. For printing use ABS/ASA and Voron standard settings. Use a M3x6 BHCS screw so there is no parts that can be caught with the extruder. Hope…
Keep the tmux shortcuts you always forget right next to your keyboard. This is a 120 × 120 × 120 mm cube made of six flat panels. Each face covers one part of tmux: Top: >_ tmux , the prefix key (C-b = Ctrl+b) and Command mode Front:…
Added ridges to the ends of the joints, as well as changed the boolean parts to fit this. single pin in the middle of the two joint halves, simply put the joint halves in one at a time. Works great. Same materials, same settings as…
Testing an idea of a 3D printed spherical gear joint (look at the OpenSCAD files for further details). Backlash is an issue. Need some more work in order to be useful for a mechanical robot arm, but that's a start. Check the video to see…
Tee piece for heater hose 3 cyl 1.0lt Daihatsu Sirion/Toyota Duet
Just my design of a CV joint for LEGO, made for a friend, hope it can help you as well ;) The design is not optimal and there is room for improvement, but it works!
I wanted to mount a screen on my Skadis. But I couldn't find any reliable 3D printed swivel solution (I need the screen to be adjustable). Instead of trying to come up with a 3D design, I opted for a reasonably priced Ball Joint module…
A quick little design i whipped up for fun, wanted to see how well it would work when printed. A modification on my Pin Joint 3.0 Design. Same settings as before, printed solid with tree supports and such. Included also is the boolean…
Taking the thing http://www.thingiverse.com/thing:351236 , I made some improvements, as magnetic joint, spool holder, endstop switches, carriages with 608zz, effector with autoleveling sensor and power plate with switch and fuse. All was…
I am using this holder together with gopro ball adapter. Gopro system is used to connect raspberry pi zero system (octoprint) equipped with camera. Compatible ball joints with threads or gopro mount:…
This is a model of the upper control arm ball joint boot for the Honda civic EG and Del Sol. I modeled the walls to be 1mm thick and it seems to come out perfect for a boot, if anyone installs it let me know how it holds up. I modeled a…
A part that joins the frame sections of a dring rack. The frame rods are approximately 6mm diameter. I printed in PLA but other matrials may suit, even a stiff flex material might work. Print with the top down, basically legs pointing up.
Added an 2nd advanced form with more design, and Rocket Launchers. Assembly instructions: 1: Attach the dark brown parts to either side of the light brown parts 2: attach the remaining side of the light brown parts to the corners of the…
Ball joint test print with 5mm female joint an 4.7mm~5.2mm male joint.
A very simple remix to allow mounting of an ESP32 camera on top of an x-axis motor cable protector .
2025.03.20 Edit to model, cleaned up geometry and a bit shorter.
This model represents a joint or arm allowing connection of multiple joints into a single structure, making sure your construction is flexible or sturdy, since you can tighten or loosen each connection with bolts and nuts. This model was…
This is a piece that I made specifically so that I could adapt my ESR Brand Qi2 charger (https://a.co/d/04FSyxH) to this base that EngineerPro made (https://makerworld.com/en/models/17679#profileId-16433) Im not sure if this adapter will…
Once I've lost one of my rod joints during kite play in field, I needed to design and print new ones on my own. Photo shows original and printed joint. Step and FreeCad source files for are attached. Feel free to modify it for your use.
A 3d printed template to make finger joints for boxes . Can accomodate two corresponding sides of a box at the same time. Good for any width wood, from ¼ to ¾. Can be used with a ½ in, or small router bit with bearing, the size of fingers…
![ESP32 Cam Motor Joint & Cable Protection [remix]](https://media.printables.com/media/prints/1196289/images/8988748_49a4b33a-22e4-4770-afcc-59ca1efb7ee2_446e658b-d55a-461f-90c2-923195b0d872/854fb883-0c6a-404d-8c4e-f79df2ebc5e2.png)
