Rockpro64 + PCI-e Card DIN Rail Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print provides the user a way to mount a Rockpro64 and PCI-e to Dual SATA-II Interface Card (Pine Store version…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 55
- Makes
- 0
- Views
- 724
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This print provides the user a way to mount a Rockpro64 and PCI-e to Dual SATA-II Interface Card (Pine Store version 2019) to a DIN Rail system.
All mounts are by pressure; the fit for the PCB holes was tight once all 4 posts were in place. The DIN rail mount is also by pressure.
I wouldn't expect this mounting system to be very resilient to vibration, shock, or movement; in this case, I would swap out the pressure fit posts for bolt holes, and consider adding a locking mechanism to the DIN Rail. My use case is in a safe place away from movement.
Credit to uwe-arzt for the DIN Rail design inspiration.
Print instructions
PLA - 215/60
This model was printed with a 6mm brim, and worked without issue on a well calibrated printer.