Rockpro64 + PCI-e Card DIN Rail Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print provides the user a way to mount a Rockpro64 and PCI-e to Dual SATA-II Interface Card (Pine Store version…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 724
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This print provides the user a way to mount a Rockpro64 and PCI-e to Dual SATA-II Interface Card (Pine Store version 2019) to a DIN Rail system.
All mounts are by pressure; the fit for the PCB holes was tight once all 4 posts were in place. The DIN rail mount is also by pressure.
I wouldn't expect this mounting system to be very resilient to vibration, shock, or movement; in this case, I would swap out the pressure fit posts for bolt holes, and consider adding a locking mechanism to the DIN Rail. My use case is in a safe place away from movement.
Credit to uwe-arzt for the DIN Rail design inspiration.
Print instructions
PLA - 215/60
This model was printed with a 6mm brim, and worked without issue on a well calibrated printer.