1 / 4
Cover for 100-240V AC to 12V DC 400W PSU with Switch, for XT60 and Banana Plugs — image 1
1 / 4

Cover for 100-240V AC to 12V DC 400W PSU with Switch, for XT60 and Banana Plugs

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I recently bought a "LED Power Supply" from eBay for my LiPo charger, and found the instructions and STL from…

Rating
0 / 5
Likes
1
Downloads
15
Makes
0
Views
290
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I recently bought a "LED Power Supply" from eBay for my LiPo charger, and found the instructions and STL from bastian___ - but unfortunately that cover didn't fit my PSU, so i designed a new one.

The PSU has the model number DY01, accepts 100-240V AC and outputs 12V DC up to 400W, item 131148272815 on eBay. The eBay sellers specs are not quite correct, it has a width of 114mm and a height of 50mm.

I saw similar ones on DealExtreme, their dimensions (112x50mm) should fit, too.

Post-Printing

Parts

I am using the following parts to add a power input, switch, XT60 connector and banana jack:

Input:

Switch: https://www.voelkner.de/products/951195/Panasonic-Wippschalter-250-V-AC-16-A-2-x-Aus-Ein-AJ8W201BF-rastend-1-St..html

Banana Jacks: https://www.voelkner.de/products/89911/Sicherheits-Einbaubuchse-260-Gseb-Rot.html and https://www.voelkner.de/products/89909/Sicherheits-Einbaubuchse-Seb-2600-G-Sw.html

XT60 Connector: https://www.voelkner.de/products/816169/Akku-Buchse-XT60-vergoldet-1-St.-Reely.html

You will need 2 additional M4 screws to mount the cover to the PSU (2 existing screws from the PSU will be used), and 2 M3 screws for the input socket.

Category: Electronics

Tags