Hex driver bit handle with an embedded magnet
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.44 – €0.54 net (excluding VAT)
For file: Stubby Hex Bit Screwdriver handle with pocket for 8x3mm magnet_0.2mm_PLA_MINI_33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.49 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 33 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remixed to add a pocket for an 8mm x 3mm round magnet and a loop hole for small cordage.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 164
- Makes
- 8
- Views
- 665
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I've also included a gcode file for a Prusa Mini/Mini+ which has a Pause At Height for letting you put in the magnet. Note: The pause occurs approximately 21 minutes into the print.
CAUTION: I'm not sure if it's an issue with the Prusa Mini's firmware or an Octoprint problem, but the M601 command doesn't work if you print the gcode file from Octoprint to the Mini. It does work though, if you load it onto a USB flash drive and print from there.
FYI, here's some info on the M601 issue: https://forum.prusa3d.com/forum/hardware-firmware-and-software-help/pause-m601-not-working/
2025-02-18: If you want to use your 4mm hex bits, you can find my 4mm to 6.35mm adapter sleeve here: https://www.printables.com/model/1197861-4mm-to-635mm-hex-bit-adapter-sleeve
2023-08-01: Added a version with a loop hole for attaching to a keychain.