Link's Awakening Tribute Model For Most 3D Printers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Color swap print of Links Awakening on Gameboy, put some double sided mounting tape on the back and hang it up!
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 21
- Makes
- 0
- Views
- 474
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
A fun gameboy screenshot created in HueForge
200mm x 180mm fits on most printers!
As seen on tiktok @extrudedhappiness
Print at 100% infill with a layer height of 0.16mm with a base layer of 0.2mm
Swap Instructions: (Use height range modifier for Bambu AMS equipped printers, use filament change gcode for other printers to pause and change colors at the follow intervals):
Black until layer #3 at 0.52mm
Dark Blue until layer #6 at 1mm
Fuschia until layer #11 at 1.8mm
Cold White for the rest.
I used Flashforge Black Pla, Burnt Titanium (Dark Blue), Nebula Purple, and Bambu Matte White for the model in the picture.