1 / 4
Replacement gear for Playtive electric trains
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces a broken gear inside a Playtive electric train car. FreeCAD file included.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 90
- Makes
- 0
- Views
- 871
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The gear is intended to be friction-fitted onto the main drive axis, so the central hole is slightly undersized and needs to be carefully drilled out with a drill slightly smaller than the axis diameter. Please feel free to adapt to other diameters as required.
For best results, print with a 0.25 mm nozzle and support. The gear shown in the Pictures was printed with Ultimaker Tough PLA end of 2020 and still works fine. Looking forward to read about your experience with other materials in the comments section.