IKEA Trofast Baseplates for Gridfinity
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity Baseplates for IKEA Trofast containers.
- Rating
- 4.5 / 5
- Likes
- 63
- Downloads
- 274
- Makes
- 3
- Views
- 3,459
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Note: Recently found that some Trofast are a little smaller. Have designed slightly smaller and will print and retest before I post.
Girdfinity baseplates to fit inside IKEA Trofast containers. I use these with brackets I made as drawers for Kallax storage.
The original baseplates I built from had 6mm models for magnets. I could not get 6mm magnets in. So I made plates with 6.1mm and 6.2mm holes for press fit and glue in. I fine tune with X-Y hole compensation.
Print two of Left and Right to make a full set. I use 4 screw inserts for each of one side, then bolts from the other side. So if you insert on the Lefts only, all will work together. See photos for more info.