1 / 2
Artillery Genius/Sidewinder fan duct 2x5015 — image 1
1 / 2

Artillery Genius/Sidewinder fan duct 2x5015

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a part cooling upgrade for Artillery Genius, Genius Pro, Sidewinder x1 or Sidewinder x2.

Rating
5 / 5
Likes
23
Downloads
109
Makes
1
Views
1,084
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a fan duct for part cooling for all current Artillery Genius and Sidewinder 3d printers

(It hasn't been tested with the original Genius or Sidewinder x1 but may work)

It uses two 5015 24v radial fans wired up in parallel 

It should be printed from a material that can withstand the high temperatures of a hotend and build plate, not PLA. I made mine out of ASA, but you could use other materials like ABS or PETG

No supports should be needed as long as you print settings are good

You will need:

2x m3x20 or m4x20 bolts and nuts (to connect fans to duct)

2x m3x8 (to connect duct to hot end assembly)

 

Fans I used = https://www.amazon.co.uk/WINSINN-Cooling-50x50x15mm-Extruder-Makerbot/dp/B079BPS9Q8/ref=sr_1_2?crid=15OGAXYSMNBVI&keywords=winsinn+5015+24v&qid=1690480738&sprefix=winsin%2Caps%2C80&sr=8-2

ASA I used = https://www.3djake.uk/fillamentum/asa-extrafill-natural?sai=2767

Nuts and bolts I used = https://www.amazon.co.uk/Glarks-510Pcs-Stainless-Socket-Assortment/dp/B0734J3CSX/ref=sr_1_6?crid=3JVU60GQ8Z488&keywords=Glarks%2Bscrews&qid=1690481076&sprefix=glarks%2Bscrews%2Caps%2C75&sr=8-6&th=1

 

Tags