1 / 5
HSW Cutter Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A wire Cutter holder for the HSW (Honeycomb Storage Wall). 3 Variation.
- Rating
- 4.94 / 5
- Likes
- 1,641
- Downloads
- 9,001
- Makes
- 196
- Views
- 16,897
- Reviews
- 168
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Wire Cutter Holder for the HSW
Compact holder that can be printed without support.
Easy to Snap to your Honeycomb Storage Wall.
3 Different variations.
Cutter Dimension
This holder is designed based on the generic wire cutters with the following dimensions.
- T Thickness must be less than 13.5 mm.
- W The cutter must have a minimum of 37 mm when it is in compression.
- H Approximately 130mm height.
Print orientation:
Print flat as the image shows. No needs support.
Print Settings:
- Material: PLA/PETG
- Layer heigth: 0.2
- Perimeters: 4
- Infill density: 25%
Happy Printin!!!