HackHeld Vega II Case - Battery
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY, open-source, hackable handheld based on the ESP8266 Deauther. HackHeld Vega II Case - Battery
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 91
- Makes
- 0
- Views
- 694
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Autor: Hackheld is a DIY, open-source, hackable handheld designed to be easy to build and customize. It is based on the ESP8266 Lolin D1 Mini development board and features a 1.3" OLED display, six buttons, and a NeoPixel RGB LED. It runs the Deauther firmware, which allows it to perform various tests against Wi-Fi networks.
While the primary purpose of the HackHeld Vega is to allow anyone to easily and cheaply build their own OLED Deauther, it can also be used as a general-purpose ESP8266 development board with a display. The pinout is printed on the back of the PCB.
👉 Learn more at hackheld.spacehuhn.com
Printed on my Prusa Mini with Prusament PETG and 0.25mm DRAFT setting.
------------------
I modified this model in order to achieve a larger place for placing the battery, antenna and switch. I also added a version without holes so that you can add holes as needed.
Print parameters
Nozzle: 0,4
Supports: NO
Material: PLA, PETG
>> If you want to buy me a coffee, you can for any amount, I will be very grateful. <<
Don't forget to follow my profile so you don't miss anything. It costs nothing and made me happy. Thanks in advance.
Don't forget to upload a photo of your print and share.
Thank you very much for your support.