Somfy Smoove Wall Frame
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall frame for the Somfy Smoove remote. It can be attached to a wall using double sided tape (I used 2mm thick tape).
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 65
- Makes
- 1
- Views
- 420
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- GNU General Public License v3.0
Wall frame for the Somfy Smoove remote. It can be attached to a wall using double sided tape (I used 2mm thick tape). The remote is easily pressed into it and can also be removed by applying pressure to the back.phoe
The base models are for generic use, there's a single and a double version, the other models are likely mostly for inspiriation that you can fit them on uneven surfaces as well (see the images).
I have provided a step file and fusion file for easy remixing.
I printed with supports, but if you're not to bothered by a less uniform surface on the underside, it can also be printed without. Printed in both PETG ans ASA, 3 wall thickness. In ASA it gave me some curling if I didn't use a brim (the contact surface is probably too narrow).