105 models
This box is designed to enclose an ESPSomfy-RTS remote, an ESP32 based project allowing you to control Somfy shades over WiFi or via HomeAssistant (see YouTube video ). The case can also be used for any radio project consisting of an…
Hardware case for ESPSomfy-RTS Project by rstrouse (thanx!) Integration for Homeautomation (as e.g. Homeassistant) for radio controlled Somfy Shades, Blinds pp. >> Project see https://github.com/rstrouse/ESPSomfy-RTS Case is for using…
I just changed the great design from Thibaut Martin to be mounted with M3 drywall screws. Thanks a lot for sharing Thibaut! I left plenty of tolerance to cope for different printer accuracies, so M3 drywall screws should fit all the way…
Quick mount for a somfy tahoma switch. It's designed to have a snug fit inside the rubber feet. Could be remade with a single screw point but i preferred it not beeing able to rotate. I printed it with a modifier removing the top and…
An magnetic holder for Somfy Telis remote control. I put mine on my fridge. You'll need 3 magnets 10x3mm. You'll glue them or they will stay on you fridge's door… I modeled 4 emplacements for 4 magnets but 3 magnets are enough. I printed…
You got a Somfy IO rollo blinds remote that for sure does not fit into your Gira switch series Standard 55 frame? Then download and print this file. The frame fits into the S55 frame and can be fixed with the frame to the wall. Once…
This is a simple case for an ESP32 with enough space to use dupont cables on the pins. It is designed to hold a standard ESP32 DevKitV1 board and a CC1101 transceiver module. The ESP32 and transceiver were hot glued into the cases. The…
Wall support for somfy tahoma box. It needs 2 (small) holes in the wall with 93mm distance between the origin of the holes. I printed in PETG (because I had it of white color) but you can print also with PLA. I suggest to print it so that…
Just print the two parts of the case. (0.2mm layer height or less ; no support needed) Insert and cut a piece of 1.75mm filament as a pin for the hinge. Tip : Use a different color for each family member device or use the text tool in…
A bracket for Somfy remote using the original wall mount clip. Print instructions Print the two parts laying flat on the bed, then glue them together. Supports are needed for the sides of the bracket. You can print the bracket standing up…
I have Somfy blinds and remotes to control them. However, I didn't have any way to hold them, apart from a drawer. This model is designed to hold the remotes and being able to be attached to the wall with 3M Command Picture Hanging…
Somfy Smoove controls do not fit into the Berker S1 series. In my case I mount my Somfy Smoove controls aside to already existing switches. Therefor I only needed a ring to get the Smoove into the cover and secure it from the back. There…
Ce modèle est une reproduction 3D précise du Support mural Somfy 2401496 officiel, conçu pour les caméras Somfy Security ou Somfy Indoor Camera . Il conserve les dimensions d’origine : environ 70 × 38,3 × 65 mm.…
A back cover for the Somfy Smoove Origin IO remote control . Its usally meant to be wall mounted to loke like a wall switch. This cover allows you to keep it portable around the house without having its innards and batterie in the back…
Took the model from fkm492, added screw holes for the C1101. Keeps the module better in place, with the antenna weight.
Remote holder for disabled individuals or those struggling to store their remote places
The unit rests inside this bracket, it is not fixed. Ideal for mounting it next to a plug socket as I've done.
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Somfy remote control holder. To be fixed with double face tape on the…
Support mural pour box Somfy Tahoma switch
The original remote holder doesn't have any retetion walls on the side. And as a result the remote can easily fall off the holder. That's why I designed one that holds the remote securely. No supports required. Attach it with mounting…
A modified version of the remote control cover.
I created this box to house the somfy controler that was created by Evgeni and described in:https://www.die-welt.net/2021/06/controlling-somfy-roller-shutters-using-an-esp32-and-esphome/
Also required: Secures the Radio Module M3x4 2x Clamps the case together M3x8 or M3x10 4x #8 Screws to attach to a wall if need be.
If you want to use Somfy Smoove and Chronis UNO with the Swiss socket system from Feller (EDIZIOdue), you need these two files: The adapter for mounting the Chronis Uno to the ground plate, the cover for matching the Somfy Smoove to the…
The wall transmitters for my roller shutters were flying around for a long time. I like to be flexible, so I did not like to use screws to attach the wall transmitters. Also, that's why the adapter is in two parts. There is a carrier…
Juste un cache pour ne pas appuyer par inadvertance sur les boutons. a accrocher avec l'anneau
Ersatzabdeckrahmen für Somfy Rollladenschalter oder Wandsender / Smoove Pure Alternativ zum Basteln einer Automatisierung der Steuerung… _______ Replacement cover frame for Somfy roller shutter switch or wall transmitter / Smoove Pure…
This base enables you to connect straight micro USB cables to your Tahoma Switch. F.ex. an ethernet adapter. I used a $10 Ethernet adapter from AliExpress, made for ChromeCast, FireStick etc. The original adapter from Somfy would've cost…
Wall frame for the Somfy Smoove remote. It can be attached to a wall using double sided tape (I used 2mm thick tape). The remote is easily pressed into it and can also be removed by applying pressure to the back.phoe The base models are…
Somfy Smoove controls do not fit into the Siemens Delta switch series normally. The official adapter from Siemens is working but looks not good and is very expensive. In my case I mount my Somfy Smoove controls aside to already existing…
outil pour la vis du capot de moteur de portail Somfy. imprimer avec les deux dents en haut pour avoir la face plate sur le plateau. paramètres recommandés 4 périmètres, remplissage 20/25%
A simple holder for a Somfy Keytis garage door/gate remote. Although modeled around the Keytis 4 NTS (4-channel), holds the Keytis 2 NS as well. The smaller remote is just a bit more loose, but does not fall out on itself. Hole size is 4…
The rubber main button on my remote broke, so I decided to design and make a replacement on a 3D printer. Printer settings: Infill: 100%
CZ: Tento stojánek je navržen speciálně pro nástěnný ovladač rolet Somfy Smoove. Umožňuje vám pohodlně umístit ovladač na stůl, poličku nebo jiný rovný povrch. Elegantní a praktický design zajišťuje, že ovladač je vždy snadno dostupný a…
Somfy Motor Bracket Adapter Roll-Up 28 Print instructions Printer Brand: Prusa Printer: [i3 MK3] Rafts: No Supports: Yes Resolution: 0.15mm Infill: 20% Filament: Prusa PLA White
Battery cover for the blinds remote control Somfy Telis 16 RTS
It has to parts. An adapter for your Somfy remote control wich fits perfectly into a Busch Jaeger power outlet/light switch and a lid to cover it. You assamble it this way: 1: You put the adapter into the Busch Jaeger part, from behind.…
Support pour télécommande SOMFY smoove pour pegboard Ikea SKADIS PLA Infil: 15% Support pour les crochets N'hésitez pas à me laisser un commentaire, ou poser une question.
Für Jung CD 500 Schalterserie eine Adapterplatte für die Somfy Schalterserie für Rollos, Markisen oder sonstige Steuerung für den Haushalt. Beispiele wo dieser Adapter angewendet werden kann: Chronis S UNO Smoove Chronis +IB Smoove…
A simple wall mount for the Somfy Smoove 1 RTS Can be attached on a wall or a furniture by using screws (screw holes in the model) or double sided tape
This holster holds a Somfy remote in an unused slot of a Leviton DECORA® wall plate. If you have two light switches, you can install a three-slot plate and put this holster in the third slot. djedi did the hard work of shaping the holster…
Well I had some different engine for rollers. Bought somfy to replace came without adapter. So I created one
support télécommande portail somfy pour DS5 (pour ceux qui n'utilisent pas le lecteur cd) Print instructions Unassociated tags: télécommande somfy Category: Automotive Summary support télécommande portail somfy pour DS5 (pour ceux qui…
A simple wall mount that accepts a single screw to mount the remote to the wall. Print with a 0.15mm layer height. Wide part sitting on the build plate and enable supports. Support settings that easily remove: Top contact Z distance:…
Somfy KeyGo fob case replacement with buttons. Printed in PETG to withstand car heat. Need to tac the PCB with little drop of glue on the tw lateral tab to grab the PCB. Made with OpenSCAD
Somfy Rolladen Schalterabdeckung für Merten System M
This two-part adapter allows a Somfy Smoove roller shutter switch to fit into a Busch-Jäger Future Linear frame. The mounting plate screws into the flush-mount box and provides the correct geometry to hold the Smoove securely. The…
Support à 30° pour Somfy V500 Insérez les écrous M4 avant de fixer au mur avec 4 vis M5 à tête fraisée A imprimer en PETG minimum (4 Walls, 4 Bottom & Top, 50% Infile) Orientation vers la Gauche, pour la Droite, faire un Miroir dans le…
This holder is specifically designed for the Somfy TaHoma Switch and perfectly matches the device’s design. Ideal for use in living rooms, utility cabinets, technical rooms, or offices. With this wall mount, you can avoid leaving your…
printed with Prusament ASA white 0,1mm layer height 100% infill mk3s+
Ersatzdoppelabdeckrahmen für Somfy Rollladenschalter oder Wandsender / Smoove Pure Alternativ zum Basteln einer Automatisierung der Steuerung… _______ Replacement double cover frame for Somfy roller shutter switch or wall transmitter /…
Bonjour, Voici un Pignon 15 dents pour portail AXOVIA SOMFY Le pignon à été dessiné pour être imprimé en ASA ou PA6-CF Pas de supports nécessaire, ils sont intégrés au dessin.
This is a bracket for a Somfy Telis remote control. It consists of two parts: The bracket itself and the cover for the screws. The cover may need to be refinished with sandpaper to ensure a smooth fit. Printing with PLA with 0.20 Layers…
This case is designed to be used for the ESPSomfy RTS controller and is compatible with the following components: Transceiver https://www.cdebyte.com/products/E07-M1101D-SMA/7 Seeed Studio XIAO ESP32-S3…
maintient du couvercle pour un intellitag qui a les pattes de fixation cassées
a imprimer en 2 fois en faisait un miroir de la pièce. imprimer PETG
A replacement case for the somfy 2-button remote. It is designed to be glued shut and be replaced on battery change. This print is extremely sensitive to exact print dimensions! If an .8mm section is printed as e.g. 1.4mm the casing will…
I printed it with supports, mainly because I didn't optimize the last bits of the model. besides that, it is quite easy to print. PS: yes, there is still room for improvement. Got the rotation of the mechanism not perfect…
Le moteur somfy de mon volet electrique est tombé en panne. Je voulais le remplacer par un moteur plus puissant et moins cher. J'ai fabriqué des adaptateurs pour maintenir les supports somfy, mais pour pouvoir mettre un moteur lexman d'un…
I made this model to fix a Somfy vibration sensor with more stability than with the provided two-sided tape.
Some remotes have special edition from special manufacturers. Thus the ordinary holders did not fit as remote too small. You could take the remote out of the outer case, but then you would need another case. Makes no sense to me. So I…
Print info: Material: PLA Infill: 15% Layer height: 0.12 (I think) Nozzle: 0.2mm Supports: No Printed on Bambu H2D Assembly: light press fit from outside surface Result: Works very well however maybe too well. As there is no spring…
I don't wantet to drill holes in the sideboard so i designed this to use it with an doublesided adthesive tape. Print Settings Printer: Anet A6 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Notes: I userd a brim just to be sure!…
Hello, Here's my enclosure to keep everything in place. Features : Top cover is sliding Back vent holes + a hole that you can drill if you need run some wires USB is accessible Bottom : vent holes, 2 small access holes for the reset and…
I printed in TPU and it came out great. Currently in use since June 2021
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) The crown and tubing adapter for my Somfy 530R2 CMO roller shutter motor shattered, so I needed a suitable replacement coupling to fit inside the…
Pour remplacer le socle de base. Impression sans supports
It holds the remote quite nicely. I used 3M double tape to put it in place. Very efficient. Printed with a tiny bit of support, but it's barely nothing.
how to build Solder an ESP32 to a Somfy Keygo series remote. Those remotes use a similar case and should have the same PCB form factor. I tested with a Keygo io model. On the back of the PCB, solder 3V3 to the metal plate and GND to the…
The original bracket that comes with these remotes is complete trash and after accidentally dropping pretty much every remote I have mounted in the house, I finally decided to make a proper holder so this will never happen again. Will…
In my video linked here I show how to build a transmitter with an ESP8266, like the Wemos D1 mini and a RF module, to control awnings and shutters using the Somfy RTS remote controls. And here is the case I designed for this purpose. It…
This screw is designed to replace the original plastic screw used on the Somfy Evolvia swing gate motor cover. It corresponds to the screws found in Somfy spare part reference 2509050 , which originally includes 2 screws and 2 O-rings (10…
This is a Tahoma / Somfy Connectivity Kit mount for the IKEA Skadis system. It uses the universal pegs. Just glue them in with some super glue. It also supports the mounting option with M3 screws for the Skadis system or to a wall directly.
This is a support made for clipping Somfy One Plus surveillance camera to dropped ceilings. It's split on two parts, the body of the support which clips with the camera, and the clip of the support which clips on the false ceiling. To…
After finding big problems with smaller ESP32 clone boards (WLAN antenna on a ground plane!), I built one using a full-size ESP-WROOM-32 with the WLAN antenna clear of other parts for good range (which is why it is horizontal, unlike…
Ce support est spécialement conçu pour l’interrupteur mural Somfy Amy 1. Il vous permet de placer facilement l’interrupteur sur un bureau, ou toute autre surface plane.
Keep your Somfy remote organized and within easy reach with this custom-designed holder! This holder is perfect for mounting on the wall, ensuring that you never misplace your remote again. The design is sleek and minimalist,…
This wall holder is designed for the Somfy Keygo remote control. It works like a small pocket that is mounted to a wall, allowing the remote to be slid in from the top for convenient storage and quick access. The holder keeps the remote…
The blinds in my daughters room took ages to lower with a manual switch so I decided to change out the manually controlled motor with a wirelessly controlled Somfy IO motor. (so that with one press of a button it goes all the way instead…
This bracket is for mounting the Somfy Eolis 3D RTS Wind Sensor to the rail of a Sunsetter awning. There is really no flat level surface on the Sunsetter awning rail to mount this sensor, plus I didn't want to drill holes in my rail. So,…
Ce support est spécialement conçu pour l’interrupteur mural Somfy AMY 1. Il vous permet de placer facilement l’interrupteur sur un Ikea Skadis. Nous vous recommandons d’utilisé du filament PETG.
This key is designed to lock and unlock Somfy swing gate motors , as well as the cover screw used on these systems. It replicates the shape and function of the original Somfy tool, which is not sold separately and can only be obtained as…
Dieser Adapter ermöglicht den einfachen Einbau eines Somfy Rollladenmotors in einen Weru Fenster-Rollladenkasten. Das Teil wurde aus der eigenen Notwendigkeit heraus entwickelt und erfolgreich im eigenen Zuhause verbaut. Gedruckt wurde es…
Cache bouton simple pour télécommande de volets roulants SIMU
Remix from which was itself a remix from Thanks to the above makers.
Use any filament you want. If you place it in the sun, you better use abs or petg.
für mein Tahoma Pad habe ich diese Konsole konstruiert und gedruckt.
Ce modèle permet d'avoir plus d'espace dans le boitier d'encastrement pour intégrer une module de domotisation ZigBee ou wifi pour vos volets roulant électrique avec un interrupteur SOMFY. Vous devez réutiliser l'unterupteur de base en le…
Cover cap for the Somfy TaHoma fire alarm (1811483) which looks a little better than the original square version. Printed with PETG. Everything has been tested and works perfectly.
The alarm badge broke and cannot be attach anymore. So i built this case, 2 elements glued together, for storing the badge. The hole allow to attach it again to your keys. Print Settings Printer: Hobbyking Fabrikator Rafts: Yes Supports:…
This model is a backplate for the Somfy Smoove Origin RTS remote controller. It has been created thanks to the “ PetitPhoenix ” Electric support plate from Cult3D. I use his model as reference to create the inner fixation. The backplate…
Pignon de remplacement pour moteur Somfy portail battant
Schalterrahmen um Somfy Fernbedienung einer Markise einzuhängen.
The joint of the Somfy Outdoor Camera can break easily over time. This is a simple quick and easy fix to keep the camera in place. I attached the Fusion 360 file in case you want to improve the modell or change the angle/orientation of…
le support mural fournit par Somfy se décollant constamment j'ai modélisé un support pour visser directement au mur, imprimable en 0.2 sans support
I made this model because I had a new roller shuter/shade installed recently that came with a remote but no wall mount bracket for it. The brand, lianda, is quite common where i live and is somewhat close to famous Somfy (at least in the…
compact housing for the smoove remote that keeps the frontplate footprint There are quite fine details in this design but I tried including adequate tolerances. YMMV. Worked fine with a 0.6mm nozzle on my end I'd recommend printing in ASA…
Le moteur somfy de mon volet electrique est tombé en panne. Je voulais le remplacer par un moteur plus puissant et moins cher. J'ai fabriqué des adaptateurs pour maintenir les supports somfy, mais pour pouvoir mettre un moteur lexman d'un…
