1 / 4
ESPSomfy RTS case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the "ESPSomfy RTS" controller for Somfy RTS shades and blinds
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is designed to be used for the ESPSomfy RTS controller and is compatible with the following components:
| Transceiver | https://www.cdebyte.com/products/E07-M1101D-SMA/7 |
| Seeed Studio XIAO ESP32-S3 | https://www.seeedstudio.com/XIAO-ESP32S3-p-5627.html |
| Antenna | https://www.cdebyte.com/products/TX433-JKD-20P |
Important:
- The tall case (espsomfy-rts_case_tall) is for when you want to use 2.54 pin connectors (also called Dupont connectors).
- The opening on the lid should be towards the Wi-Fi antenna.
- Depending on the dimensional accuracy for your printer, the pin that holds down the transceiver could have a varying fit. You might need to print some iterations with different scaling factor before it's correct.
- I recommend a dab of glue to the ESP32 and transceiver pin to hold it in place.