Somfy remote case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement case for the somfy 2-button remote. Designed to be glued shut and be replaced on battery change
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 32
- Makes
- 0
- Views
- 292
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A replacement case for the somfy 2-button remote. It is designed to be glued shut and be replaced on battery change. This print is extremely sensitive to exact print dimensions! If an .8mm section is printed as e.g. 1.4mm the casing will not close, if it prints less, the buttons might fall out or wiggle too much. The relevant model sections are the little round stands for the PCB which should have a height of .8mm - 1mm. If the height is exceeded, calibrate your printer or shave off some height. Reuse the transparent LED thingy from the original casing.