Wall mount bracket for Lianda shade (somfy clone) RTS remote controller
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement bracket to mount a Lianda (Somfy clone) shade/roller shutter RTS remote to a wall
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I made this model because I had a new roller shuter/shade installed recently that came with a remote but no wall mount bracket for it. The brand, lianda, is quite common where i live and is somewhat close to famous Somfy (at least in the design). So maybe the mount will fit Somfy remote as well, let me know ...
It's a very straight forward design with 3 parts : back plate to put against the wall, base part to put the bottom of the remote and a top bracket that holds it. Base and top part match back plate shape, and mounting holes should align. It print quite fast, about 45 min for me (on my old yet capable Ender 3 V1)
Print settings :
PLA is fine, but consider using a more durable filament if you have issues
3 perimeters
infill >10%
print by objet mode is recommended for better layer adhesion
orientation : keep same orientation as model files
no supports need
consider using a brim for top part (i did'nt and it turned out perfectly fine)
Assembly and mount : align holes, insert screws (Ø 4mm flat head) in each hole and mount to the wall. Parts have matching cutouts that help maintaining pieces together. Also the back plate cutouts are not the same size on top and bottom : bottom is larger.
Commercial licence : selling prints of this mode lwithout my approval is not allowed. Please get in touch through Printables PM to get a commercial licence