1 / 8
#0075 MK4 / XL Nextruder Extruder Hard Case - No Socks (4x) — image 1
1 / 8

#0075 MK4 / XL Nextruder Extruder Hard Case - No Socks (4x)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The extruder assembly and cables for the Nextruder can easily be damaged and deserves to be protected in a hard case.

Rating
5 / 5
Likes
40
Downloads
96
Makes
2
Views
1,114
Reviews
1

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, please consider buying me a coffee, and check out my other models!

**********

To take advantage of the quick swap features of the MK4 and XL printers, they need to be pre-assembled with different extruder types and diameters (example: hardened steel, 0.6mm diameter).  Then all you have to do is disconnect 2 cables and loosen 2 thumb screws to pull and swap to an alternate extruder.

Here's a hard case that can store up to 4 extruder assemblies, at the ready for the next swap.

[Updated, Aug 15, 2023]: uploaded .stl files with no adhesion helpers.

The pic below shows (with no silicone socks):

  1. 1x 0.6mm diameter brass nozzle
  2. 1x 0.4mm diameter Nozzle X hardened steel nozzle with V6 nozzle adapter
  3. 1x 0.6mm diameter Nozzle X hardened steel nozzle with V6 nozzle adapter

Features:

  1. The lid has a solid-feeling snap together clasp.
  2. Each extruder pocket has a clasp to securely retain the stem from accidentally falling out.
  3. Printed text to indicate how to remove each assembly from the case that reads: “<< LIFT HERE”

You can find my other Hard Case versions here:

  1. MK4 Nextruder Extruder - with Socks Hard Case (2x)
  2. MK4 Nextruder Extruder - with Socks Hard Case (4x)
  3. MK4 Nextruder Extruder - no Socks Hard Case (2x)

Recommendations:

  1. This is a great model for PLA. 
  2. Print with 2 perimeters, 15% infill (I used triangular)
    Note: tested with 0.4mm nozzle.Features:
  3. The lid has a solid-feeling snap together clasp.
  4. Each extruder pocket has a clasp to securely retain the stem from accidentally falling out.
  5. Printed text to indicate how to remove each assembly from the case that reads: “<< LIFT HERE”
  6. A 3-4mm brim is recommended along with ~15mm adhesion helpers at the corners to prevent the corners from lifting up.  I also recommend a 4mm brim.  See the .3mf file attached.
  7. Printed in Prusament Galaxy Black PLA.

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

Tags