1 / 8
#0075 MK4 / XL Nextruder Extruder Hard Case - No Socks (4x) — zdjęcie 1
1 / 8

#0075 MK4 / XL Nextruder Extruder Hard Case - No Socks (4x)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The extruder assembly and cables for the Nextruder can easily be damaged and deserves to be protected in a hard case.

Ocena
5 / 5
Polubienia
40
Pobrania
96
Wydruki
2
Wyświetlenia
1113
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

*** Thanks for checking out this model! ***

If you appreciate what I'm doing, please consider buying me a coffee, and check out my other models!

**********

To take advantage of the quick swap features of the MK4 and XL printers, they need to be pre-assembled with different extruder types and diameters (example: hardened steel, 0.6mm diameter).  Then all you have to do is disconnect 2 cables and loosen 2 thumb screws to pull and swap to an alternate extruder.

Here's a hard case that can store up to 4 extruder assemblies, at the ready for the next swap.

[Updated, Aug 15, 2023]: uploaded .stl files with no adhesion helpers.

The pic below shows (with no silicone socks):

  1. 1x 0.6mm diameter brass nozzle
  2. 1x 0.4mm diameter Nozzle X hardened steel nozzle with V6 nozzle adapter
  3. 1x 0.6mm diameter Nozzle X hardened steel nozzle with V6 nozzle adapter

Features:

  1. The lid has a solid-feeling snap together clasp.
  2. Each extruder pocket has a clasp to securely retain the stem from accidentally falling out.
  3. Printed text to indicate how to remove each assembly from the case that reads: “<< LIFT HERE”

You can find my other Hard Case versions here:

  1. MK4 Nextruder Extruder - with Socks Hard Case (2x)
  2. MK4 Nextruder Extruder - with Socks Hard Case (4x)
  3. MK4 Nextruder Extruder - no Socks Hard Case (2x)

Recommendations:

  1. This is a great model for PLA. 
  2. Print with 2 perimeters, 15% infill (I used triangular)
    Note: tested with 0.4mm nozzle.Features:
  3. The lid has a solid-feeling snap together clasp.
  4. Each extruder pocket has a clasp to securely retain the stem from accidentally falling out.
  5. Printed text to indicate how to remove each assembly from the case that reads: “<< LIFT HERE”
  6. A 3-4mm brim is recommended along with ~15mm adhesion helpers at the corners to prevent the corners from lifting up.  I also recommend a 4mm brim.  See the .3mf file attached.
  7. Printed in Prusament Galaxy Black PLA.

If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!

Remember, you can earn some Prusameters if you post a pic of your make!  Plus, it would make my day to see it. ;-D

Happy Printing!

Tagi