Simple Bambu Lab Door Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple door holder to fix the open door while printing PLA to prevent nozzle clogs.
- Rating
- 4.9 / 5
- Likes
- 40
- Downloads
- 274
- Makes
- 13
- Views
- 1,322
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I designed this simple and fast to print bracket to hold the door of the Bambu Lab X1 and P1S open.
While printing PLA with textured or high temperature plates, it is possible to get nozzle clogs because of the rising chamber temperature.
One solution for this is to print top glass risers with integrated vents or just to leave the door open. While leaving the door open it really bothered me to see the door vibrating.
So my solution is this little bracket, which fixes the door 10cm open. The door cannot vibrate due to the printers vibrations anymore.
Please pay attention to not damage your door gasket on printer side!
First put the bracket on printer side and afterwards bend it slightly away from the door, so the door itself can snap into the bracket. Installation is shown on title picture.
Model is mirrored, so you have your textured layer/first layer on the upper/visible side.
Bye!
Dennis