2020 Panel Corner Clip Hinge, rotates 180 degrees (based on Voron)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2020 Panel Corner Clip Hinge (based on Voron). Made for my V1E 3D Printer, details @ https://forum.v1e.com/t/37251/216
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 77
- Makes
- 1
- Views
- 1,184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
23-08-06 NOTE: Am NOT using for my build. I ended up creating and sharing a newer alternative that limits rotation to 90 degrees, uses M5x30mm. Details, pics and video at https://www.printables.com/model/546086-2020-panel-corner-hinge-rotates-90-degrees-voron-b
Was looking for 2020 hinges that can also hold/protect 1/8" (3mm) panels attached to both the top lid panel, and bottom back panel. Hinges need to support Lid weight, and resist twisting/shear forces from the Dampers/Struts.
Looked at various designs, ended up forking https://github.com/VoronDesign/Voron-
Trident/blob/main/STLs/Panels/corner_panel_clip_4mm_x8.stl
Note: Printed using Overture Transparent Red PETG. Ensure your bridging settings are dialed in for the corner overhang.
Parts:
- M3x30mm button head bolt
- M3 T-Nut
- 6x M3x10mm button head bolts
- 6x M3 Roll-in nuts. Couldn’t use slide-in nuts since they’re too large to fit in couple of spots where perpendicular 2020 extrusions meet, partly because of the interior 1/16" thick panels sandwiched between the X and Y 2020. Although M3 T-Nuts might fit, they won’t hold Lid as securely/reliably. So… Used Roll-in nuts.
- Print aza-hinge-top.stl and aza-hinge-bottom.stl parts here, or at Github.
Details about the V1 Engineering MP3DP v4 based 3D Printer this was designed for at https://forum.v1e.com/t/mp3dp-v4-azas-build/37251/216?u=azab2c