1 / 3
Lerdge iX - Frame for 20 teeth ball bearing Pulley with 3mm shaft — image 1
1 / 3

Lerdge iX - Frame for 20 teeth ball bearing Pulley with 3mm shaft

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

New frame for toothed pulley with 20 teeth and ball bearing for 3mm shaft.

Rating
0 / 5
Likes
11
Downloads
100
Makes
0
Views
629
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I had light VFAs on the Y-axis, so I wanted to use a timing belt pulley with ball bearings.
For this, the frame had to be adapted (wider and for 3mm shaft as M3 screw).

At the same time I installed another stepper motor with 0.9 degree steps, which also worked well in my Sovol SV06. The motor is a 1:1 replacement, cables don't need to be changed and it stays cool in operation.

The VFAs are now gone!
However, I unfortunately do not know whether it is now the new pulley or the new stepper motor or both mods ;-)

If you also want to use a 0.9 degree stepper motor, you have to adjust the steps - see picture.

I printed without supports and with 0.12mm layers in Extrudr PETG "neon green".

Tags