Adafruit solenoid cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a cover for the solenoid on my Home automation irrigation & aquaponic systems.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 347
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I needed a cover for the solenoid on my Home automation irrigation & aquaponic systems. I could only find one example by Marxmit here https://www.thingiverse.com/thing:2373942.
I printed it and found it did not fit my cheap Chinese version of the Adafruit solenoid, so I broke out the calipers, and taking inspiration from Marxmit' s cover, I made this version using Tinkercad.
The hole in the front is for a 15mm pvc conduit gland.
A simpler cover can also be found here for the same solenoid as the one I have.
https://www.thingiverse.com/thing:3282491
And here
https://www.thingiverse.com/thing:1730226
This part has not yet been printed, due to issues with the printer. Update will follow shortly.
Print instructions
Category: DIY Summary
I needed a cover for the solenoid on my Home automation irrigation & aquaponic systems. I could only find one example by Marxmit here https://www.thingiverse.com/thing:2373942.
I printed it and found it did not fit my cheap Chinese version of the Adafruit solenoid, so I broke out the calipers, and taking inspiration from Marxmit' s cover, I made this version using Tinkercad.
The hole in the front is for a 15mm pvc conduit gland.
A simpler cover can also be found here for the same solenoid as the one I have.
https://www.thingiverse.com/thing:3282491
And here
https://www.thingiverse.com/thing:1730226
This part has not yet been printed, due to issues with the printer. Update will follow shortly.
Print Settings
Printer:
Prusa i3 clone
Rafts:
No
</div>Supports:Yes
Resolution:
0.2
</div>Infill:20%
Filament: Cron PLA or ABS White, Black
Notes:
Mus be printed upside down to minimize the use of supports