Biohazard Fan Grill Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in…
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 85
- Makes
- 0
- Views
- 511
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in Fusion360 with some minor altertions.
The shroud is designed to be press fit so you might need to adjust it depending on your fan/tolerances.
STEP and F3D source files are included.
Print instructions
Category: Electronics Summary
I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in Fusion360 with some minor altertions.
The shroud is designed to be press fit so you might need to adjust it depending on your fan/tolerances.
STEP and F3D source files are included.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
No
</div>Resolution:0.2
Infill:
20%
</div>Filament:
Atomic Filament CF-PETG Dark Cherry Red
Notes:
I used the following additional settings in Prusa Slicer:
2 Perimeters5 Top/Bottom layers
Top and Bottom Patterns: Archimedean Chord