Biohazard Fan Grill Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in Fusion360 with some minor altertions.
The shroud is designed to be press fit so you might need to adjust it depending on your fan/tolerances.
STEP and F3D source files are included.
Print instructions
Category: Electronics Summary
I wanted to use the original version of this fan on a Raspberry Pi case but it was too big so I recreated it in Fusion360 with some minor altertions.
The shroud is designed to be press fit so you might need to adjust it depending on your fan/tolerances.
STEP and F3D source files are included.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
</div>Rafts:No
Supports:
No
</div>Resolution:0.2
Infill:
20%
</div>Filament:
Atomic Filament CF-PETG Dark Cherry Red
Notes:
I used the following additional settings in Prusa Slicer:
2 Perimeters5 Top/Bottom layers
Top and Bottom Patterns: Archimedean Chord