1 / 4
Zelda Rupee Lamp With Base and LED
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Zelda rupee lamp with LED inside
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 33
- Makes
- 0
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have another model of just the rupee now decided to modify it and add a base
Materials:
- Screw M3x8, it can be any long just needs to be an M3
- Clock Battery CR2032 3V
- Battery holder for the clock battery
- Switch ON Off (outer size 1.5 cm x 1cm) I used this one, hole made in the base is slightly tinier so it can be tight, just slide it without problem
- LED any color, I used an RGB 2 pins that blinks by itself
- 330 ohms resistor (can vary depending on the LED you used)
- some cable, solder and soldering iron
Print settings
- Rupee.stl
0% infill and walls 3
recommend to print using a clear color of filament
- Other files print settings can be anything
20%infill 0.2 resolution
Circuit
Note: ignore the middle third pin of the switch, the one used has only 2 pins
Video