ETS ATS truck shifter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
shifter knob for ETS or ATS for TH8A. Diameter: 55mm. 2 snap-in switches for range / splitter or only range and motor…
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 60
- Makes
- 0
- Views
- 1,180
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
shifter knob for ETS or ATS for TH8A. Diameter: 55mm.
2 snap-in switches for range / splitter or only range and motor break or like ever you want
Model is split in 3 parts for easy printing and assembly
Modification of TH8A needed:
the rod has to replaced due to the non standard 9mm thread on upper end. I replaced it by an M6 rod and covered it for design reasons with a 8mm stainless steel pipe. The interface to the knob is a 12mm brass rod with M6 thread inside which is fixed by a M6 grub screw. This makes it easy to allign the knob in a propper position.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
15%
Filament: dont matter ABS
Notes:
Material list beside printing material:
M6 rod (length like you want)
stainless steel pipe OD8mm ID6mm; about 35mm shorter then rod
12mm brass rod, about 200mm long with M6 thread inside
grub screw M6
nut M6 rectangular
Marquardt switches (Type 1811 or 1813; on-off or on-on so 2 fixed positions)
Arduino Leonardo or any other joystick simulator interface
3D printing settings
ABS (others will work too)
layer 0.2mm
15% infill
support needed for upper and middle part
If you need support or any help on parts, let me know
Category: Games