ETS ATS truck shifter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
shifter knob for ETS or ATS for TH8A. Diameter: 55mm. 2 snap-in switches for range / splitter or only range and motor…
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 1180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
shifter knob for ETS or ATS for TH8A. Diameter: 55mm.
2 snap-in switches for range / splitter or only range and motor break or like ever you want
Model is split in 3 parts for easy printing and assembly
Modification of TH8A needed:
the rod has to replaced due to the non standard 9mm thread on upper end. I replaced it by an M6 rod and covered it for design reasons with a 8mm stainless steel pipe. The interface to the knob is a 12mm brass rod with M6 thread inside which is fixed by a M6 grub screw. This makes it easy to allign the knob in a propper position.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0,2
Infill:
15%
Filament: dont matter ABS
Notes:
Material list beside printing material:
M6 rod (length like you want)
stainless steel pipe OD8mm ID6mm; about 35mm shorter then rod
12mm brass rod, about 200mm long with M6 thread inside
grub screw M6
nut M6 rectangular
Marquardt switches (Type 1811 or 1813; on-off or on-on so 2 fixed positions)
Arduino Leonardo or any other joystick simulator interface
3D printing settings
ABS (others will work too)
layer 0.2mm
15% infill
support needed for upper and middle part
If you need support or any help on parts, let me know
Category: Games