1 / 2
Funssor Aluminum AB Y Endstop Cover Left and Right
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Funssor Aluminum AB Brackets for Voron Printer bracket with Y Endstop Relocation. (It's OldGuyMeltsPlastic's Fault)
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 91
- Makes
- 0
- Views
- 781
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The Funssor Aluminum AB Upgrade kit is missing a couple things, 1, an endstop relocation for Y axis, and 2, a way to install an Umbilical for wires eliminating the cable chains in order to reduce mass and vibrations.
Printing Instructions:
Preferably ABS, ASA or anything tougher
NO PLA, PETG
Voron PIF Standards:
Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill pecentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: NONE
and a calibrated Printer of course.